Recently I started printing on Bambulab (previously on Průša Mini). If anyone is curious about how much difference is it

  • j4k3@lemmy.worldM
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    1 year ago

    Those are not comparable in market target or price point. This is like comparing a motorcycle saddle bag and a car trunk

              • Kale@lemmy.zip
                link
                fedilink
                English
                arrow-up
                3
                ·
                1 year ago

                I’ve got one now with a V6 knockoff hot end, steel PEI print bed, and running klipper firmware. It was backup printer, and now it’s the backup to the backup (purchased Comgrow $70 used Ender 3 pro).

                I’d like to give this to a friend that’s interested in printing, but I’d have to flash back to stock firmware. The buttons and display don’t work with klipper, and I don’t have a spare raspberry pi.

                It’s still relevant with the upgrades I made to it, except it’s still has really noisy steppers, and the build volume is so small it’s really limiting. I think the Prusa mini is still large enough to be practical. The monoprice is mostly relegated to toys.

                I need some 18650 holders for a project which the mini can do great with, but I need a lot and printing them two or three at a time won’t cut it.

          • UserNotFound@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            Nice. Personally, I don’t think that I could find use for that size. I wanted little bigger than 220x220mm because projects

            • CmdrShepard@lemmy.one
              link
              fedilink
              English
              arrow-up
              3
              ·
              1 year ago

              I got a 300x300mm Sidewinder X2. It’s just big enough to fit my noggin and therefore print a helmet capable of fitting my noggin.

            • Tenthrow@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              Yeah that is a tough size if it’s all you have. When I fist got mine I had just the mini and a CR10s 400 which is 400x400mm so anything I could get away with on the little guy I did and kept the big projects on the monster.

    • UserNotFound@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      edit-2
      1 year ago

      Very much. Can print bigger projects, or smaller one with more parts on the same plate (for example, rims for rc car, which is technically part of the bigger project)