Hi there good folk,
The new place i am moving into has the internet come into the house on the other side of where I am planning to have my office + my NAS(which needs ethernet). I much prefer having my stuff connected through ethernet, but not sure what do now, as I cant really run cables across the house. Am also renting the place so cant drill holes in walls etc… As far as I know, there are two ways for me to get ethernet in my office:
-
COAX to POE: The place does not have ethernet ports in the walls either, but it does have some wallmounted coax sockets. Is it worth looking into coax to poe adapters for either end of the sockets? Not sure how much of a fan I am of this due to the amount of cables this ends up being.
-
The other way would be to have a WiFi-extender in my office, but i guess this will sacrafice some more speed than the other solution(?). This way I would have a small switch connected to the extender which will get me some more ports too.
I am planning on buying into the Unifi prodcuts, specifically the Unifi Express device as a router. While expensive, I love the polish and feature set and control it brings. What other Unifi devices should I get into, considering probably wont be able to use PoE?
Lemmy know your thoughts, opinions and the rest - am open for all sorts of solutions!
Power-line tends to be quite slow and error prone. If you have existing coax, that is likely the better option. You can get up to 2.5gbit adapters for it: https://til.simonwillison.net/networking/ethernet-over-coaxial-cable
What about power line adapters? I’ve got a pair and they just sit there doing their thing, no config needed, just plug in and away you go. So long as you’re on the same electric circuit, they’ll connect over that. Mine are made by TP Link and never had a problem (not sure if Unifi make them, sorry). Best of luck to you!
Didn’t know this was an option even, will defo look into this asap and evaluate wether this fits my use case or not, thanks!
I had a set of four for getting ethernet around the few places I rented. There was maybe the odd quality decrease when there was a lot of electrical load, but they worked great otherwise.
A set of four what? I’m sorry, not quite following.
You can TRY power line adapters:
TP-Link AV2000 Powerline Adapter https://a.co/d/0fa6e3f3
Their application can be hit or miss, but mine have been perfect. Had them just under 2 years. Able to get full bandwidth and no discernable latency addition
FWIW, these are effective only when both are used on the same circuit. If you live in an older home, the chances of this being the case are higher.
My entire apartment, except for the washroom, is on the same circuit. It also means I can’t run an air conditioner without tripping the breaker. :|
Maybe it’s ignorance on my part, but my office and the router in the house aren’t on the same circuit.
Or, at least they have different sections in the breaker.
House is brand new, put up in 2021
MoCA is a way to send wired Ethernet up to (300mb/s, at least the version i have) over coax. Verizon fios would provide these devices to send internet to set top boxes over existing coax cabling, but you can get a pair of these devices and send Ethernet in on one side, and Ethernet out the other side.
I have noticed however, it adds a bit of latency to the connection, which may be trouble.
Where is this happening? Which country, which laws?
NAS on WiFi works, but it is less fun than NAS on a cable.
Powerline works only with solid copper wire installed in the walls, connecting these rooms with as few interruptions as possible. Never with flexible lines.
P.S. corrected PoE to powerline
Norway. It works, but I dont have a networking card anyways and much prefer having things wired if possible.
I guess you should simply talk to the landlord about your needs, and try to find an agreeable solution together.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters NAS Network-Attached Storage PoE Power over Ethernet Unifi Ubiquiti WiFi hardware brand
3 acronyms in this thread; the most compressed thread commented on today has 14 acronyms.
[Thread #823 for this sub, first seen 22nd Jun 2024, 14:05] [FAQ] [Full list] [Contact] [Source code]
Tell the ISP you’re signing up with that there’s no drop for their service, and have them run a new one to the office. Check your local laws about touching their wire or box on the outside of the house before removing it.
Also, it’s really easy to patch holes in drywall with a little joint compound and matched paint.
Otherwise, MoCA and powerline ethernet can work. Modern wifi is pretty good too, though consider walls, etc. between points A and B and which frequency you’ll be using.