I’m attempting to configure an anonymized DNS service using dnscrypt-proxy2, routed through the Tor network. I believe I have everything needed for it to work, but that does not seem to be the case. The DNS resolution is fine, but it’s not being proxied through Tor as desired.

 services.resolved.enable = false;
 services.dnscrypt-proxy2 = {
   enable = true;
   settings = {
     ipv6_servers = config.networking.enableIPv6;
     block_ipv6 = !(config.networking.enableIPv6);
     listen_addresses = ["127.0.0.1:53" "[::1]:53"];
     force_tcp = true;

     use_syslog = false;
     odoh_servers = true;
     require_dnssec = true;
     require_nolog = false;
     require_nofilter = true;

     anonymized_dns = {
       routes = [
         {
           server_name = "*";
           via = ["anon-plan9-dns" "anon-v.dnscrypt.up-ipv4"];
         }
       ];
       skip_incompatible = true;
     };

     sources.public-resolvers = {
       urls = [
         "https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/public-resolvers.md"
         "https://download.dnscrypt.info/resolvers-list/v3/public-resolvers.md"
       ];
       cache_file = "/var/lib/dnscrypt-proxy2/public-resolvers.md";
       minisign_key = "RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3";
     };

     block_unqualified = true;
     block_undelegated = true;
     proxy = "socks5://127.0.0.1:9050";
   };
 };

 systemd.services.dnscrypt-proxy2.serviceConfig = {
   StateDirectory = "dnscrypt-proxy";
 };
    useDHCP = false;
    enableIPv6 = true;
    nameservers = [
      "127.0.0.1"
      "::1"
    ];
    networkmanager.enable = true;
    networkmanager.dns = "none";
  services.tor = {
    enable = true;
    enableGeoIP = false;
    torsocks.enable = true;
    client = {
      enable = true;
    };
  };
  • TeaTastic@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    2 days ago

    Routing DNSCrypt through the Tor network should, in theory, anonymize DNS queries. This configuration would result in the DNS resolver observing the IP address of the Tor exit node rather than my actual IP address, thus hiding my identity from the resolver. I’m not sure why the actual request to the site would go to the IP directly.

    For implementing DNS over HTTPS (DoH) via Tor, I followed the guidelines from this GitHub repository and translated them into my current approach.

    I’ve gone through DNSCrypt’s logs, but nothing really stood out. I’m a bit lost with Wireshark - there’s so much data even if I filter it by DNS or Tor Socks Port (From my relay).

    While you asked about the basis for my conclusions, it’s worth noting that if the Tor proxy were working as intended, I would also anticipate a considerable increase in latency. There’s a huge difference when I enter https://one.one.one.one/help/ normally with "Use system proxy settings" in my browser and when I enter it with a "Manual proxy configuration" with the SOCKS Host set up and "Proxy DNS when using SOCKS v5" checked on.

    • onlinepersona@programming.dev
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      4
      ·
      edit-2
      2 days ago
      sequenceDiagram
          Computer->>+Nameserver: Where's wikipedia.org
          Nameserver-->>-Computer: 185.15.59.224
          Computer->>+Wikipedia: GET /
          Wikipedia-->>-Computer: return /
      

      Here is the simplified sequence diagram

      As you can see the request to wikipedia itself does not go through a nameserver, only the DNS request does. It’s the entire reason Firefox has the option to proxy DNS queries over the proxy: to avoid DNS leaks

      Right now, all that should be happening is DNS requests being proxied, not the rest of your traffic.

      There’s a huge difference when I enter https://one.one.one.one/help/ normally with "Use system proxy settings" in my browser and when I enter it with a "Manual proxy configuration" with the SOCKS Host set up and "Proxy DNS when using SOCKS v5" checked on.

      To me that indicates the DNS proxy through TOR isn’t actually working with your dnscrypt setup 🤔 However it’s difficult to debug from here. It’s possible the DNS query is slow, but because the actual HTTP request is going through your standard internet with no proxy it’s fast, and when you do turn on the proxy for HTTP/S requests, you observe actually using TOR for everything and thus the latency.

      Could you run these commands please

      # Find which process is running the local DNS server
      sudo ss -plant | grep ":53 " # alternatively sudo netstat -plant | grep ":53 "
      
      # Check your DNS resolver config
      # You can share it or not, but 127.0.0.1 MUST be in it, otherwise your DNS queries aren't being encrypted/proxied
      cat /etc/resolv.conf
      
      # Measure how long it takes to query a new domain name
      time dig techhub.hpe.com
      time dig bash.org
      time dig element.io
      

      If you feel comfortable with it, you share the logs of dnscrypt (I don’t know what kind of information is in there, so you might have to clean it).

      journalctl -u dnscrypt-proxy2 or just systemctl status dnscrypt-proxy2. Either here or PMed. Here are encrypted pastebin alternatives.

      Anti Commercial-AI license