they seem to be made of rubber or polyeurathane and they limit how far the wheels will turn. yall think theres downsides to removing them?
yall think theres downsides to removing them?
Every part on a car is there for a reason.
Why are they installed in the first place?
What do you see as the upside to removing them?
upside: more steering angle
as @empireOfLove pointed out, they most likely “cushion the impact of going full lock” and i think thats probably why now that i think about it
upside: more steering angle
Outside of drifting, why is that an upside?
i wouldnt mind a bit of a better turning radius. also im slowly buildying my car to be a drift car so ya
honestly tho i think imma just hold off and do it right with an angle kit
To me an angle kit seems like a better solution here. Maybe you could get away with just removing the bumpers, but if an angle kit is in the cards given your budget, you might as well do it right.
It’s always worth considering where you feel it makes sense to cut corners vs when to do things right, and that’s gonna depend a lot on how tight money is and whether there are other places you know you’re gonna really have to spend.
I think that would be the better option. A drifting steering rack is designed to handle the forces applied at high steering angles while I doubt the standard one would be as high quality.
mustang dude running 10mm flat spacers on stock lug nuts with no hub ring
Well I already don’t have any respect for this guy.
Potential problems. Those exist to cushion the impact of going full lock and also prevent the drive gear from running to the end of the rack and damaging the teeth or destroying the shaft seals. It’s probably “ok” but it can cause damage over time.
Not all cars have them either. On all my Japanese cars those bumpers and stops are built inside the rack and can’t be removed.
i see. with that in mind, ill see if i can move them rather than completely removing them. maybe i can push them a bit further along or something. if i do, ill be sure to get under the car and listen for any noises under full lock. ty :)
Well, you won’t be able to move them, it looks like they simply go in between the end lip of the steering rack rod and the body of the rack, and get compressed when at lock, so they’re always at the very end.
You’ll likely get away with cutting them but don’t be surprised if you end up replacing your steering rack at some point.
Here is an alternative Piped link(s): https://piped.video/watch?v=kxbZviWzrlw
https://piped.video/watch?v=kxbZviWzrlw
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.