Let’s hear all about your progress. Don’t disappoint your judgmental internet buddies!

  • DarkSirrush@lemmy.ca
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Replacing our incredibly sketchy wood stove with a gravity fed pellet stove.

    Still mulling over how to replace the pipe on the roof, since the opening was built for a 7" pipe and the pellet stove requires a 3-4" pipe at most.

    Heavily considering running the new pipe through the current one and paying someone to do it right next year.

    • m0darn@lemmy.ca
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      Not something I have any experience with but please allow me opine from my armchair:

      the only problems I forsee with that approach are:

      – any bends you might have to navigate – supporting/stabilizing the new pipe – sealing the top to prevent a down draft forming between them and pulling exhaust into your home

      • DarkSirrush@lemmy.ca
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        There are no bends, or I wouldn’t even consider it, and figuring out the support/stabilizing of the new pipe would likely tie into sealing it to prevent the downdraft.

        Those are good points though.

      • DarkSirrush@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Yes, but I need to make sure it doesn’t increase the airflow by a very large margin, or it affects the stove in a very negative way (either burning dangerously hot, or causing smoke to go the wrong way, etc).

        Mostly I need to inspect what’s currently in place and see what fits where to figure out what I am doing.

    • Dixiewalker@beehaw.org
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      My sister’s creosote build up in her exhaust pipe ignited one Thanksgiving. A fire of sticky tar, in a tube running through inaccessible walls and roof. That was interesting (ripped the pipe out quickly and it was contained). You may want to inspect before adding in a new exhaust, if you haven’t yet.

      • DarkSirrush@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Chimney fires are incredibly scary, and I definitely will be cleaning the old piping before I do anything else. Fortunately I don’t have any sort of attic or complicated setup, it just goes through about 1’ of ceiling/roof and that’s it.