It’s not done yet, but I figured I’d show off a little bit since I have been using this for a few weeks now. This is the “swirl”. It’s heavily inspired by the helix with some notable changes:

  • mbk Choc Spacing (Dimensions are about 12.5cm x 8.5cm on either half)
  • Reversible roller encoders on the top inner switch

https://github.com/vmorganp/swirl

  • KeyboardGoesBrrr@lemmy.worldOP
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    I have a larger build and nailing down the ergonomics is really hard without a split board.

    I could use a unibody split but this is just easier to adjust and travel with this way.

    I could also use either half independently. (with a quick firmware change on the right, but still)