#Wordle1099 5/6* Grade: B+
🟨⬜⬜⬜🟨 D-
🟨🟨🟨⬜⬜ C
⬜⬜🟨🟨🟨 B
🟩🟩🟩🟨⬜ A+
🟩🟩🟩🟩🟩 A+
Hey, it actually worked and took less the a couple of min.
I have one, going to try and tape it off from the other components heat it up and see if that works.
Yes, The 5v regulator is the same and it is outputting 5.01v under load and 5.12v no load. Not sure why the first went bad but I’m guessing the POS 5v reg sent a spike on the 5v rail when it went bad and that damaged the TLV75733. The Teensy acts exactly the same connected to a USB unmounted from the board. It boots, runs for a min while the TLV heats up then the 3v3 drops and the Teensy crashes.
#Wordle1091 4/6 Grade: C+
⬜⬜⬜🟨⬜ D-
🟨⬜⬜🟩⬜ A-
⬜⬜🟨🟩⬜ F
🟩🟩🟩🟩🟩 A+
Microsoft’s Bing API services (the source of DuckDuckGo’s search data) went down at approx 3am ET and has not yet returned to service. Bing, DuckDuckGo, CoPilot, ChatGPT and more are unable to use the Bing services so in turn are also not working or not working fully.
Just use a different OS
Replace the electrolytic capacitors. Check and clean the flex ribbon for the screen and the connector.
#Wordle1026 4/6* Grade: C
⬜⬜⬜⬜🟨 F
🟨🟨⬜⬜⬜ D-
🟨⬜⬜⬜🟨 F
🟩🟩🟩🟩🟩 A+
I thought it was a way of folding fabric but apparently it’s a braided hair style
I had a Kenmore (I think the mfg was Char Broil) for 29 years and only had to change out the burners and the like once. The bottom tray finally rusted and it needed some other t.l.c. but no parts could be found. I got a Pit Boss pellet/gas combo at the end of last season. Smoke side is awesome, Gas side is good with some unevenness (hot & cold spots). The whole thing seems to be well built with heavy gage powder coated or anodized aluminum parts. Will see how it holds up.